Manufacturers and traders of Bolts, Nuts, Washers, Screws, Anchors, Scaffolding & Hand Tools. IS-Standard compliant. MS, SS & Hot-Dip Galvanized. Bulk & retail.
Click any category to see size ranges, material grades and applicable IS standards. Custom sizes on request.
| Product | Size Range | Material | IS Standard |
|---|---|---|---|
| Hex Bolt | M4–M36 Length 10–300mm | MSSS A2/A4HDG | IS-1363/1967 IS-1363/1984 · BS-916 |
| High Tensile Bolt | M10–M30 | Gr 8.8Gr 10.9 | IS-6639/1972 |
| Transmission Tower Bolt | M12–M24 | HDGMS | IS-12427/1988 |
| Foundation Bolt (L & J) | M12–M36 | MSHDG | IS-1363/1984 |
| Flange Bolt | M6–M16 | MSSS | IS-1363/1984 |
| SS Bolt | M4–M24 | A2-70A4-80 | IS-1363/1984 |
| U Bolt | Pipe OD 15–150mm | MSSSHDG | — |
| J Bolt / Eye Bolt | M8–M20 | MS ZincSS | — |
| Product | Size Range | Material | IS Standard |
|---|---|---|---|
| Hex Nut | M3–M100 | MSSS A2HDGBrass | IS-1363/1984 IS-136/1992 |
| Nylock Nut | M4–M24 | MSSS | IS-1363/1984 |
| High Tensile Nut | M8–M36 | Gr 8 MS | IS-1363/1984 |
| Flange Nut | M6–M20 | MSSS | IS-136/1992 |
| Lock Nut (Jam) | M4–M24 | MSSS | IS-1363/1984 |
| Long Nut (Coupling) | M6–M24 | MSSS | — |
| Square Nut | M4–M16 | MSSS | IS-1363/1967 |
| Dome / Acorn Nut | M4–M16 | MSSS | — |
| Product | Size Range | Material | IS Standard |
|---|---|---|---|
| Plain Washer | M3–M48 | MSSSHDG | IS-2016/1967 |
| Spring Washer (Single Coil) | M4–M24 | MSSS | IS-3063/1967 |
| En8 Washer (High Tensile) | M6–M24 | En8 Black | IS-2016/1967 |
| Golden Washer (Brass) | M4–M16 | Brass | — |
| Product | Size Range | Material | Note |
|---|---|---|---|
| Rawl Bolt (Anchor Bolt) | M6 · M8 · M10 · M12 · M16 | Zinc Yellow | Concrete fixing |
| Wedge Anchor | M6–M20 | MS ZincSS | Heavy concrete |
| Drop In Anchor (Bullet) | M6 · M8 · M10 · M12 · M16 | MSSS | Flush mount |
| Sleeve Nut (Pipe Nut) | M6 · M8 · M10 · M12 | Zinc Yellow | — |
| Pin Type Anchor | M6–M16 | Zinc Yellow | Light duty |
| Threaded Rod | M6–M36 · 1m / cut | MSSS A2-70HDG | IS-1367 |
| Slotted Channel | 32×33×2.5mm 16g / 18g / 20g / 22g | MSHDG | Cable & pipe support |
| Coupling Nut | M6–M20 | MSSS | — |
| Product | Size Range (dia×length mm) | Material | Head Type |
|---|---|---|---|
| Drywall Screws | 6×13 to 6×75 | Black Phosphate | Bugle / Phillips |
| Sheet Metal Screws (Galv) | 4×6.5 to 14×25 | Tempered Galv | Phillips · Pan also avail. |
| Sheet Metal Screws (SS) | 6.5×4 to 100×10 | SS A2 | Phillips head |
| Self Drill — CSK Head | 6×13 to 7×50 | Zinc plated | Phillips CSK |
| Self Drill — Hex Head | 10×19 to 12×125 | Zinc plated | Hex washer |
| Self Drill — Truss Head | 8×13 to 8×100 | Zinc plated | Truss / Pan |
| Machine Screw | M3–M6 · Various lengths | MSSS | Round · CSK · Pan |
| Wood & Coach Screw | M6–M12 (coach) Various (wood) | MSSSHDG | Hex (coach) · CSK (wood) |
| Product | Size / Spec | Material | Standard |
|---|---|---|---|
| Forged Coupler (Swl/Fixed) | 48.3mm tube OD | Forged SteelHDG | EN-74 / BS-1139 |
| Golden Coupler (Swl/Fixed) | 48.3mm tube OD | Zinc plated | IS-2750 |
| Tie Rod | 12–20mm dia · Custom length | MSSS | Formwork shuttering |
| Anchor Nut & Wing Nut | M12–M20 | Cast IronHDG | Formwork standard |
| Prop Nut & Prop Sleeve | 48–60mm OD pipe | MS | Adjustable props |
| Beam Clamp | Flange width 50–150mm | Malleable Iron | I-beam / H-beam |
| Top Plate & Bottom Cup | 48.3mm tube OD | Pressed / Cast Steel | Cuplock system |
| Scaffolding Pin | 16–20mm dia | MSZinc | Locking / Split pin |
Micky Fasteners of India (MFOI) was established in 1976 under the guidance of Baldev Raj Gupta, B.E. (Mechanical). For over 48 years we have been consistently manufacturing the highest quality fasteners.
Based in Ludhiana with offices in Jalandhar, MFOI manufactures Mild Steel and Hot-Dip Galvanized fasteners serving industries across India.
📍 B-XVI-1646/1, Muradpura, Near Cycle Market, Ludhiana – 141003
📍 2, Dada Colony, Jalandhar – 144004